SEEMEE 20 is a lightweight Micro-USB rechargeable tail light. Its high powered COB red LED light source producing a max output of 20 lumens, and is capable of 180° of visibility.
SEEMEE 30 is a new version rear light with high transparent optical lens and ambient light sensor. - EFFICIENT ENERGY CONSUMING--SEEMEE 30 emits stronger light outputs while consuming less energy with high transparent lighting strap, more efficient lighting performance comparing to traditional red case tail light. - DESIGN FOR YOUR SAFETY-- SEEMEE 30 lets you be seen from up to 800 meters, and its elegant translucent anti-scratch case provides 230 degree high side visibility, to make you more visible at risk moments. - AMBIENT LIGHT SENSOR-- Sensitive infrared light sensor built-in, automatically change the light mode according to environment, thus to increase warning effect during the day. - LOW POWER MODE-- When battery level is lower than 5%, SEEMEE 30 automatically changes to economic flash mode, which can run up to 20 minutes before it totally powers off. - IPX6 WATERPROOF RATE-- Storm or wind, SEEMEE 30 will resist the water from anywhere in any challenging environment. - COMPATIBLE FOR ALL-- Multiple mounting methods, solid silicon strap can be mounted safely to different bar shapes conveniently. - MEMERY FUNCTION AND MULTI-MODES -- Satisfy different riding scenarios. - CONVENIENT USB - SIZE: 61x14x21mm. - WEIGHT: 24g.
SEEMEE 60 is a bike taillight with high powered COB red LED light source, the max output is 60 lumens, and is capable of 180 degrees of visibility - SMART BRAKE SENSOR LED BIKE REAR LIGHT--Built in sensor will activate the brake light feature when it detects a sudden change in motion pattern, and blinks in a series of super fast flashes at 60 lumens. If no vibration is detected in 60 seconds, SEEMEE60 enters into a dormant mode to save energy and is re-activated upon any movements. - USB RECHARGEABLE BIKE BRAKE LIGHT-- It is rechargeable via Micro USB. A full charge will take 1.5 to 2 hours under 5V/500mA, Charging light will turn from red to green indicating its built in Lithium battery has been fully recharged. - QUICK INSTAILL--Installation and removal of the taillight is super quick and easy, rotate 90 degrees to install and rotate 90 degrees back to remove. - WATERPROOF OF IPX6--Anodized aluminum surface crafted seamlessly around the red led surface allows the SEEMEE60 to be completely waterproof with an IPX6 rating. - MULTIPLE MODES--3 brightness levels, a constant mode and 2 flash modes can be used in any combo. - Size: 41x33x23mm. - Weight: 34g.
SEEMEE 180 is a powerful bicycle tail light with convenient USB recharge. - The max output can be reached up to 180 lumens - Smart motion and ambient light sensor give you enhancing using experience. - EFFICIENT LIGHT OUTPUT-- Compares to red cover, transparent optical fiber emits stronger and uniform light outputs while consuming less energy. - HIGH VISIBILITY-- SEEMEE 180 allows riders to be seen from up to 2000m, distinguishes you from the traffic effectively. - SMART MOTION SENSOR-- The motion sensor turns on automatically when braking, and lights on for 3 seconds at maximum 180LM. - SENSITIVE AMBIENT LIGHT SENSOR-- Under smart mode, the built-in light sensor automatically adjusts the brightness according to ambient lighting conditions, thus to increase warning effect efficiently during day and night. - LOW POWER MODE-- When battery level is lower than 5%, SEEMEE 180 automatically changes to economic flashing mode(27LM), which can run up to 20 minutes before it totally powers off, this feature ideally extends the burning time. - ALL AROUND VISIBILITY-- The translucent hard case gives SEEMEE 180 high side visibility, which lets riders to be seen from all directions. - SMART BATTERY INDICATOR-- At standby mode, click the power button to activate battery indicator for 3s. - EASY TO MOUNT-- With the versatile mounting strap, SEEMEE 180 is easy to be mounted under saddle or different seat posts. - IPX6 WATERPROOF RATE-- SEEMEE 180 is fully sealed, and can resist water from any directions. - EASY TO OPERATE-- Double click to change the mode, short click to cycle through brightness settings, memory function for quick start.
BREAKING THROUGH DESIGN CONCEPTION, BRINGS YOU REAL 360° VISIBILITY. POWERFUL LIGHT OUTPUT, LET YOU BE SEEN DAY AND NIGHT. SMART MODES SETTINGS, MAKE IT ALL HANDS FREE. - 360° Tracing light design - Smart motion sensor - Sensitive ambient light sensor - Low power mode - Smart battery indicator - IPX6 waterproof rate
Page 1 of 1