Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools

Specialized Road Tube Spool
$29.99
A simple, compact system to carry everything you need to fix a flat without weighing you down. - Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber - CO2 valve head and 2-sided tire lever snap into place for compact and secure storage - Holds a single threaded 16g CO2 cartridge - Fits up to 80mm long tube valve stems
SRAM Disc Brake Bleed Kit
$85.99 $112.99 24% Off
Confident braking means you can go faster. Enough said. SRAM's Disc Brake Bleed Kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: • 2 syringes/fittings • bleed blocks • Torx tool • Crow's foot • Bleeding Edge Fitting
Park Tool BBT-22 Bottom Bracket Tool
$29.99
The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
Park Tool Bottom Bracket Tool (External Bearing)
$33.99
The BBT-19 is a heavy-duty, shop-quality tool for installing and removing Shimano, TruVativ, Race Face, SRAM, FSA and Campagnolo 16-notch external-bearing bottom bracket cups. Made from investment-cast steel, the BBT-19 can be used with either a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
Park Tool CG-2.4 Chain Gang Chain Cleaning System
$53.99
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.
Park Tool Cassette Lockring Tool with 12mm Guide Pin
$13.99
The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings
Park Tool Cassette Lockring Tool with Guide Pin
$12.99
Park's FR-5G Cassette Lockring Tool fits most cassette lockrings from Shimano, SRAM, SunTour and SunRace. Made from heat-treated tool steel, the FR-5G features an extra-long splined body to prevent slippage and a guide pin to ensure the tool is in straight, preventing stripped lockrings. And, it can also be used to remove and install Shimano disc brake rotors. The FR-5G requires the use a chainwhip tool to prevent the cassette from turning during lockring removal.
Park Tool Chain-Wear Indicator
$16.99
A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.
Park Tool Chainring Nut Wrench
$8.99
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
Park Tool FR-3 Freewheel Remover
$19.99
The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Park Tool FR-8 Freewheel Remover
$16.99
Park's FR-8 Freewheel Remover fits flip-flop BMX hubs with 30 x 1mm threads. It can be held with a wrench or vise, and its narrow profile allows use without removal of cones and locknuts.
Park Tool Folding Hex Wrench Set (1.5-6mm)
$14.99
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
Park Tool Freewheel Remover
$12.99
12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.
Park Tool Gear Clean Brush
$9.99
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Park Tool HCW-16.3 Chain Whip/Pedal Wrench
$40.99
The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).
Park Tool Hex Tool
$13.99 - $17.99
Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.
Park Tool Home Mechanic Pedal Wrench
$19.99
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.
Park Tool PCS 10.3 Deluxe Home Mechanic Repair Stand
$324.99 $408.00 20% Off
"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes. The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.? - Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage - Durable, textured powder coat finish - Integrated height-adjustable parts tray - Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) - Maximum weight capacity*: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 45"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg)"
Park Tool Shop Cone Wrench
$13.99 - $14.99
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
Park Tool Triple Spoke Wrench
$15.99
• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)
Lezyne Rap II 18 Multi Tool
$39.99
Combining style, technology and ultimate value, the Rap II series bike multi tools provide unmatched performance at their price points. Engineered and manufactured in-house, these multi tools feature a number of innovative features. The ergonomic side-plates are machined from lightweight aluminum, anodized black, and offer a custom magnetic holder for an emergency quick-link. The steel tool bits are now longer and introduce our Black Anti-Corrosion technology, which provides superior corrosion resistance. Each configuration features up-to-date options for all modern bicycles; including gravel bikes, mountain bikes, e-bikes, and road bikes. Compact and versatile, these mini tools are built to last and designed to efficiently get riders back on the road or trail. - Ergonomic forged aluminum side plates with link storage - Enhanced anti-corrosion black CRV bits wrapped - Chrome vanadium steel fastening hardware - Weight: 148g Tool bits: - Quick link holder - Hex 2/2.5/3/4/5/6/8mm - Torx T10/T25 - Phillips - Chain breaker - 8/10mm wrench - 4 spoke wrenches - Disc brake wedge - Rotor truing tool
Bontrager Preset Torque Wrench
$26.99
High-performance bicycles require precision during setup and adjustment. The Preset Torque Wrench provides secure adjustments while preventing damage to lightweight bars and forks from over-tightening. Product details - Tools are pre-set to 5Nm or 6.8Nm - Check component tightening specifications before using - 4mm and T25 keys are non-removable
e*thirteen by The Hive Spider Removal Tool
$27.99
- Spider removal tool is compatible with all e*thirteen cranks that have a removable spider, and can also be used as an installation/removal tool for e*thirteen bottom brackets
Wolf Tooth Components Bottle Opener & Rotor Tool
$26.99
This opener grips the bottle cap like a wolf on prey and pops it right off every time! We even added a slot for truing your brake rotors and a large hole for a keychain or carabiner. This is not just some generic opener we selected from a catalog – this is a precision engineered tool that you will want to have with you all the time. Weight is a mere 32g so you can carry it with you wherever you go (even on the bike). - Precision shaping for the best bottle opening experience - Grips the bottle cap like a wolf on prey and pops it right off every time - Features slot for truing brake rotors and a large hole for a keychain or carabiner - Made in the USA from 7075 T6 aluminum - 32g
Wolf Tooth Components Crown Race Installation Adaptor
$26.99
This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet. - Fits Park Tool CRS-15.2 crown race setting tube - Design and manufactured in Minneapolis, MN USA - Material - aircraft grade aluminum
Wolf Tooth Components EnCase System Bits
$35.99
EnCase System bit set contains: - Spoke wrench - Valve core wrench - Flat head bit - Phillips bit - Hex key sizes: 2, 2.5, 3, 4, 5, 6, 8 mm - Torx compatible sizes: T10, T25, T30
Wolf Tooth Components EnCase System Storage Sleeves
$65.99
Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
Wolf Tooth Components Pack Wrench Inserts
$35.99 - $49.99
Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools. - All inserts are 1 inch hex drive interface compatible - Design and manufactured in Minneapolis, MN USA - Nickel plated 4140 chromoly steel
Wera 300/7 Mix 1 Screwdriver Set
$85.99
Application-specific mixture of workshop screwdrivers with normal long blade and especially small Stubby screwdrivers with short blade for hard-to-reach areas. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. The blades have all the benefits of the Wera Bit technology. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. The hexagon anti-roll protection prevents annoying rolling away of bits in the workplace. - Short compact Stubby screwdriver for working in confined spaces - Laser-tip screwdriver with long blade - Ergonomic 2-component Kraftform handle for precise work - Hexagonal anti-roll feature against rolling away - Take-it-easy tool finder: color coding according to profile and size
Wera 334/6 Rack Screwdriver Set
$61.99
6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. - Hard gripping zones for high working speeds, while soft zones ensure high torque transfer - Partially Lasertip: the tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head - "Take-it-easy" Tool Finder: color coding according to profile and size. - The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace - Includes practical rack for tidy storage of the screwdrivers - Screwdriver for slotted and cross-recess screws, Phillips - Multi-component Kraftform handle for fast and ergonomic screwdriving
Wera 354 Hex Driver
$5.99 - $9.99
High-quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. "Take-it-easy" Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Hexagonal screwdriver hex-plus - Multi-component Kraftform handle for fast and ergonomic screwdriving - Take-it-easy tool finder: color coding according to profile and size - Hex-plus allows socket head screws to live longer - Hexagonal anti-roll feature against rolling away
Wera 826 T Kraftform Turbo Driver
$126.99
A part-time universal gear integrated in the handle of the screwdriver significantly increases the working speed. The turbo function can either be switched on or off by pressing a button. Turning it off is recommended for fine adjustment and final tightening or loosening of a high torque screw. The robust steel design is maintenance-free and ensures a long product life. Thanks to the Rapidaptor bit holder, the Kraftform Turbo can be used with all conventional 1/4" hexagon bits for a wide variety of screw profiles. With the Rapidaptor function the bits can be inserted directly and can be easily removed by pushing the sleeve forward—allowing single-hand operation. - Quadruples the screwdriving speed in a purely mechanical way (without battery) - Activation and deactivation of the turbo function by a simple push of a button - The fixable universal gear allows powerful screwdriving and easy fine adjustments - Robust, maintenance-free gear made of steel (maximum torque 14 Nm) - 1/4" hexagon take-up with Rapidaptor quick-release chuck
Wera 840/4 Impaktor Hex Bit
$13.99
High-quality Impaktor bits for hexagonal socket screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Hex-Plus ensures a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. - For socket head screws - Impaktor technology for above-average service life - Particularly suitable for use with customary impact drivers - Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out - Take-it-easy tool finder: color coding according to profile and size
Wera 8740 B HF 1 Zyklop Bit Socket Set
$170.99
3/8" drive Zyklop bit sockets. - Bit sockets with retaining function for hexagon socket screws - The holding function holds screws securely on the tool - Take-it-easy tool finder: color coding by size - Knurling on lower end for more grip when used manually - Chrome vanadium steel, matte chrome-plated - 1x 8740 B HF 1 Zyklop bit socket set with holding function - 3/8" drive, 7 pieces - 7x 8740 B HF Zyklop bit socket with holding function, 3/8" drive: 4.0x107.0, 5.0x107.0, 6.0x107.0, 7.0x100.0, 8.0x100.0, 9.0x100.0, 10.0x100.0 - 1x Hook-and-Loop Fastener Strip 120, 70 x 50mm
Wera 8767 B TORX HF 1 Zyklop Bit Socket Set
$126.99
3/8" drive Zyklop bit sockets. - Bit sockets with holding function for TORX screws - The holding function holds screws securely on the tool - With Take-it-easy tool finder: color coding by size - Knurling on lower socket end for more grip when used manually - Chrome vanadium steel, matt chrome-plated - 1x 8767 B TORX HF 1 Zyklop bit socket set with holding function, 3/8" drive, 6 pieces - 6x 8767 B HF TORX Zyklop bit socket with holding function, 3/8" drive: TX 25x107.0, TX 27x107.0, TX 30x107.0, TX 40x107.0, TX 45x100.0, TX 50x100.0 - 1x Hook-and-Loop Fastener Strip 120, 70 x 50 mm
Wera 950 SPKL L-Key Hex Wrench
$5.99 - $11.99
High-quality Wera L-keys with color-coded, convenient plastic sleeve. The tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. - L-keys for hexagonal socket screws - Hex-Plus allows socket head screws to live longer - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Hexagonal ballpoint on the long arm - Wear-resistant size marking
Wera 950/9 Hex-Plus L-Key Set
$68.99
High-quality L-key set with extra-short arm for use on difficult-to-access screws. For hexagon socket screws. Hex-Plus offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The precise chrome-plated design ensures high corrosion protection. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. Comes in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal. - Extra-short arm for use on difficult-to-access screws - Hex-Plus allows socket head screws to live longer - The ballpoint on the long arm allows dependable working even in difficult situations - Chrome-plated for high corrosion protection - In a practical clip out of wear-free material
Wera Belt B 2 Zyklop In-Hex-Plus Bit Socket Set
$179.99
3/8" drive Zyklop bit sockets. - 8-piece bit socket set on a robust textile belt, 3/8 - Bit-sockets with all the advantages of the Wera bit technology - Bit-sockets with holding function for screws/bolts - Smooth Twist to Unlock mechanism for a secure fit and simple removal of the sockets - Suitable for attachment to a wall, shelf, tool trolley and to the Wera 2go System - 1x Belt B 2 Zyklop In-Hex-Plus bit socket set with holding function, 3/8" drive, 8 pieces - 8x 8740 B HF Zyklop bit socket with holding function, 3/8" drive - 3.0x35.0, 4.0x35.0, 5.0x35.0, 6.0x35.0, 7.0x38.5, 8.0x38.5, 9.0x38.5, 10.0x38.5 - 1x Socket rail B (textile belt), 8 location, unloaded, 45 x 275 mm - 1x Hook-and-Loop Fastener Strips 30, 200 x 30 mm
Wera Belt B 4 Zyklop Bit Socket Set
$105.99
3/8" drive Zyklop bit sockets. - 9-piece socket set on a robust textile belt, 3/8 - For manual and power tool operations (non-impact) - Smooth Twist to Unlock mechanism for a secure fit and simple removal of the sockets - "Take-it-easy" tool finder: color coding by size - Suitable for attachment to a wall, shelf, tool trolley and to the Wera 2go System - 1x Belt B 4 Zyklop socket set, 3/8" drive, 9 pieces - 9x 8790 HMB Zyklop 3/8" socket: 8.0x29.0, 10.0x29.0, 12.0x29.0, 13.0x29.0, 15.0x29.0, 16.0x30.0, 17.0x30.0, 18.0x30.0, 19.0x30.0 - 1x Socket rail B (textile belt), 9 location, unloaded, 45 x 310 mm - 1x Hook and Loop Fastener Strips 30, 200 x 30 mm
Wera Bicycle Set 2 Screwdriver Tool Set
$150.99
Bicycle tool set in practical pouch with 89mm long bits. Includes 816 R Kraftform bit hand-holder with Rapidaptor quick-release chuck and multicomponent Kraftform handle for fatigue-free working. - Compact 13-piece screwdriving tool set for bicycle applications, also for mobile use - Practical range for DIY assembly work and repairs - Lightweight and robust folding pouch with 12x89mm long bits - Ergonomic Kraftform bit hand-holder with Rapidaptor quick-release chuck - Rapidaptor quick-release chuck allows rapid bit change
Wera Bicycle Set 4 Hex & L-Key Wrench Set
$114.99
L-keys made from circular material with plastic sleeve for use on bicycles. The plastic sleeve makes working comfortable even at low temperatures and is easy on the fingers. All L-keys are easily accessible due to their color coding and size markings. For hexagonal socket screws and Torx screws. In a robust and lightweight folding pouch. - L-key set for hexagonal socket screws and Torx screws - L-keys with Hex-Plus advantage for a longer screw life - L-keys are easy to find thanks to their wear-resistant size markings - In a practical, lightweight folding pouch for easy carrying
Wera Bit-Check 12 Metal Bit 1 Bit Holder & Bit Set
$31.99
Robust Bit-Check by Wera The Bit Holder allows for a quick overview of the Bit Set available inside, while ensuring they do not get lost. Its compact size makes it easy to transport, e.g. in your shirt pocket. The universal holder includes a strong magnet for the take-up of bits with 1/4" hexagon head drive. Bits can be inserted in a power screwdriver or used in the chuck of an electric drill. - Multi-component Bit-Check can be positioned upright for secure bit storage - Tough bits for universal use
Wera Click-Torque B 1, 3/8-inch Torque Wrench
$390.99
Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. For right-hand use (clockwise torque control) and with 45-tooth reversible ratchet mechanism. - With 3/8" square drive, reversible ratchet, 45 teeth - Audible and tactile release mechanism when the set torque value is reached - Measuring range: 10-50 Nm; Precise to +/- 3% - Very robust design with ergonomic 2-component handle suitable for right-hand use
Wera Hex Torque-Indicator
$126.99
Wera torque indicator with fixed torque for hexagon sockets. The slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and is then impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, so no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission. - T-handle is ideal for transferring controlled tightening torque and high loosening torque - Error-free screwdriving due to non-slip friction clutch and exact torque transmission - Tamper-proof against accidental changing of set torque value - Corrosion-resistant blade
Wera Joker Ratcheting Combination Wrench
$35.99 - $44.99
High-quality, metric, combination ratchet wrench by Wera. The new generation of combination ratchet wrenches. Suitable for hexagon socket screws, bolts or nuts. Comes with holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra-hard teeth and reduces the danger of slipping. The integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied. - Practical holding function due to metal plate in the jaw - Limit stop prevents any slipping - The double-hex geometry reduces the risk of slipping - Return angle of only 30 degrees - "Take-it-easy" tool finder: color coding by size
Wera Joker Self-Setting Spanner
$99.99
With its continuous and parallel jaws, the Joker 6004 replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, reducing the risk of slippage or damage. The ratchet feature ensures fast and consistent screw driving without removing the tool. By using the corner-width rectangular prisms, a return angle of only 30° can be achieved. The single-arm design, in conjunction with the ratchet feature and the corner-width prism, makes it possible to work even in confined spaces. - The adjustable Joker 6004 covers all metric and imperial dimensions in the respective field of application - Automatic and continuous grip of hexagon screws and bolts - Lever mechanism when gripping avoids slipping and damage - Fast and consistent screwdriving without removing the wrench thanks to mechanical ratchet function - Return angle of only 30° through placement in the corner-width rectangular prisms in the mouth
Wera Joker Set 11-Piece Ratcheting Combination Wrench Set
$454.99
High-quality combination ratchet wrench set by Wera. The new generation of combination ratchet wrenches, suitable for hexagon bolt heads or nuts. Comes with a holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. - Practical holding function thanks to the metal plate in the jaw - Limit stop prevents any slipping - The double-hex geometry reduces the risk of slipping - Return angle of only 30 degrees - "Take-it-easy" tool finder: color coding by size
Wera Kraftform Kompakt 400
$146.99
T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. - T-handle screwdriver for the transmission of particularly high tightening and loosening moments - Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working. - With Rapidaptor technology for lightning-fast bit changes - Bitholders, magnetic, for easier application of the screw
Wera Kraftform Kompakt Stubby
$108.99
Handle/interchangeable blade system for fast replacement. Short handle for hard-to-reach areas. Suitable for the mounting of bits with 1/4" hexagon drive. - Handle/Interchangeable blade system for rapid exchange of the blade - Stubby bit hand holder: short compact shape for working in confined spaces - Ergonomic 2-component Kraftform handle for precise work - Take-it-easy tool finder: color coding according to profile and size - Compact, textile box with high robustness, low weight and volume. Suitable for docking with the Wera 2go system. - Bits with BiTorsion zone to cushion load peaks
Wera Kraftform Kompakt Turbo 1 Driver and Bit Set
$254.99
A part time universal gear integrated in the handle of the screwdriver significantly increases the working speed. The turbo function can either be switched on or off by pressing a button. Turning it off is recommended for fine adjustment and final tightening or loosening of a high torque screw. The robust steel design is maintenance-free and ensures a long product life. Thanks to the Rapidaptor bit holder, the Kraftform Turbo can be used with all conventional 1/4" hexagon bits for a wide variety of screw profiles. With the Rapidaptor function the bits can be inserted directly and can be easily removed by pushing the sleeve forward—allowing single-hand operation. - Quadruples the screwdriving speed in a purely mechanical way (without battery) - Activation and deactivation of the turbo function by a simple push of a button - The fixable universal gear allows powerful screwdriving and easy fine adjustments - Robust, maintenance-free gear made of steel (maximum torque 14 Nm) - 1/4" hexagon take-up with Rapidaptor quick-release chuck
Wera T-handle Screwdriver Hex-Plus
$10.99 - $29.99
T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. There is a special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. - T-handle screwdriver for the transmission of high tightening and loosening moments - Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for high power transmission and fatigue-free working - "Take-it-easy" tool finder: color coding according to profile and size - With additional short arm for the transmission of extremely high torques due to the leverage of the long arm - With holding function (HF) securely holds the hexagon socket screw on the tool
Wera T-handle Screwdrivers Hex-Plus Set
$135.99
T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. Special surface treatment of the blades provides high corrosion protection and an optimum fit in the screw head. - T-handle screwdriver for the transmission of particularly high tightening and loosening moments - Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working. - "Take-it-easy" tool finder: color coding according to profile and size - With additional short arm for the transmission of extremely high torques due to the leverage of the long arm - Holding function (HF) securely holds the hexagon socket screw on the tool
Wera Wera 2go 2 Tool Container
$259.99
The Wera 2go tool container is the ideal solution for individual and convenient tool transport thanks to its hook-and-loop fastener system and its compact size. The inner and outer hook-and-loop fastener zones ensure a maximum in terms of space utilization. This means that an incredible number of tools can fit in container. Wera 2go 2 ensures a low weight since only the tools really needed for the job are taken along. The robust and dimensionally stable material protects the tools carried against damage and moisture and enhances the service life of the tool container. The padded and width-adjustable shoulder strap and the snug fit of the container on the body mean that the container is easy and convenient to carry, hands-free. It comes with an individually adjustable hook-and-loop fastener partition for screwdrivers and other tools. - Wera 2go tool container with inner and outer hook-and-loop fastener zones - Individually configurable for greater mobility - Ideal also for the docking of Wera textile boxes and pouches equipped with hook-and-loop fastener zones - Easily packed and cleared out - Hands-free transport
Wera Zyklop Speed Ratchet
$135.99
Zyklop ratchet has 72 fine-pitched teeth to ensure a low return angle of only 5 degrees. The ratchet head pivots freely and can be locked into any position by using the slide switch. With enhanced hand clearance, it works conveniently even in confined and difficult-to-access areas. The predefined locking positions at 0, 15 und 90 degrees, both to the right and left, ensure safe working without any slipping of the ratchet head. The ratchet can be used as a conventional screwdriver in the 0 position by attaching an adaptor and a bit. The flywheel design ensures rapid screwdriving, and the rotation-symmetric construction of the Kraftform handle and the free-turning sleeve support rapid twisting. The outstanding design of the Kraftform handle fits perfectly into the hand, preventing blisters and calluses. The softer anti-slip zones enable the low-loss transfer of high torque. - Combines 5 different types of ratchet into one tool - Flywheel design and easy-to-grip free-turning sleeve for high working speeds - Freely pivoting ratchet head, push-button release and left/right switchover - Fine-tooth design allows a small return angle of 5 degrees
Topeak ALiEN S
$104.99
The ALiEN is back with a new face! This limited edition ALiEN tool equipped with 31 function pro-quality stainless steel tools for bike maintenance / repair and outdoor adventure. Take-apart design allows easy access and full use of all tools. Includes self-tightening tools and a nylon bag. Tool: 31 Functions - 2-L / 2.5 / 3 / 4 / 5 / 6 / 8 / 10 mm Allen wrenches, T25 Torx wrench, 8 / 9 / 10 mm box wrenches, 14G / 15G / Mavic m7 / Shimano spoke wrenches, chain tool*, chain hook, super hard anodized tire lever, #2 Phillips / flat head screw drivers, serrated knife / saw, bottle opener & engineering grade polymer spacer (*The chain tool is compatible with single and multi-speed chains up to 12-speed, NOT including Campagnolo hollow pin chains) - Tool Material: 403 Stainless steel - Body: Pressed stainless steel frame / Engineering grade polymer - Bag: 1800 denier HD Nylon - Secondary chain link fence, chain pin breaker, two chain pins compartment tool lock, two piece design, self-tightening tools - Size: 8 x 4.5 x 4.5cm / 3.1" x 1.8" x 1.8" - Weight: 272g / 9.57oz
Topeak Alien III CB DX
$112.99
When a mechanical problem has you feeling lost in space, the Alien II is the extraterrestrial that will ensure you don't have to phone home. Its molded-plastic body provides an excellent gripping surface and splits in two with a press of a button. Tools include: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches; 8, 9, 10mm box wrenches; Phillips and regular screwdrivers; a universal chain tool with chain hook; 14-, 15-gauge, Shimano and Mavic spoke wrenches; a stainless-steel knife; a T25 Torx wrench for disc brakes; a tire lever and a compartment for 2 chain pins all wrapped up in a stainless-steel body with carbon plates. There's even a handy bottle opener for after the ride.
Topeak Chain Tool for Ratchet Rocket RX
$14.99
Make your Ratchet Rocket RX (sold separately) even more useful when you add Topeak's Chain Tool for the Ratchet Rocket RX. It mounts on the exterior case, and is operated by the ratchet handle so you'll be prepared for any trailside repair.
Topeak DuoSpoke Wrench (13G/4.3mm)
$17.99
Topeak's DuoSpoke Wrench is the perfect tool for lacing up new wheels or truing your old ones. It comes with two different spoke sizes on either side of the wrench, so you've always got the right one at hand.
Topeak Hexus X
$44.99
Topeak's Hexus X is an award-winning, 21-function multi-tool with updated design to store T15, T25, and 8mm hex tool bits inside. Tire levers are securely side-mounted, and have additional tools built into them. The Hexus X is an excellent choice for both road and mountain bike riders. - Allen wrenches: 2 / 2.5 / 3 / 4 (2 pcs) / 5 / 6 / 8mm - Torx bits: T15 / T25 / T30 - #2 Phillips screwdriver - 14G / 15G spoke wrenches - 2 engineering grade plastic tire levers - Presta Valve Core Tool - Chromoly steel chain tool - Steel wire chain hook - Weight: 170g *Chain tool is compatible with single and multi-speed chains up to 12-speed except Campagnolo 11-speed hollow-pin chains
Topeak Link Meister
$194.99
This is the chain tool to end all chain tools. Topeak's well-named Link Meister works with all multi-speed chains, including 11-speed hollow-pin chains, regular pinned links and removable links. For pinned chains, an integrated chain hook holds the links during assembly, and an adjusting knob locks the pin in its correct alignment. For removable links, integrated pliers hold your power links for easy removal, a life saver. You've even got a chain-wear guide for precise measurements and storage for an extra plunger pin and chain pins.
Page 1 of 6 Next page