Parts & Accessories
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws
Improve traction in the worst conditions with aggressive toe studs. Ideal for CX racing or Mountain riding in snow, ice, mud or even just hard pack dirt. - 15mm length is longer than standard - Durable stainless steel is engineered for long lasting wear - Precision threads are compatible with most off-road cycling shoes. - Original equipment for some S-Works XC. - Packaged as 5pc, so you have a spare.
- Allows installation of 2-bolt SPD-style cleats on select Bontrager Road shoes - Compatible with Bontrager road shoes with nylon sole - Adapter plate replaces rubber plug in sole of shoes - Packaged as pairs
S2-Snap BOA cartridge assembly kit for personalizing your shoes. Includes: One left cartridge dial assembly, one right cartridge dial assembly, two laces. Compatible with the following models: - S-Works Road - S-Works XC - Women’s S-Works XC - Pro XC - Women’s Cascade - Rime Expert - Comp MTB - Women’s Motodiva
Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection
Mother Nature is always in flux, but mankind is both smart and adaptable. In other words, whenever she changes her mood, we always have the right tool for the job. And when that job is protecting against blustery, cold conditions, the right tool is our Deflect Comp Shoe Covers. Compared to our Element line of shoe covers, Deflect places more of a focus on wind resistance, so you'll find a stretchable construction with lightweight insulating properties. And to make getting in and out of the covers easy, we also included a rear zipper. - Deflect fabrics feature a good amount of stretch and a brushed back interior to ensure a light level of insulation. - Abrasion-resistant bottom and toe panels increase the lifespan. - A universal cleat opening makes these covers compatible with either road or mountain shoes. - Reflective elements. - Rear Velcro closure.
Depending on where you live and ride, full shoe covers might be a little too aggressive for the conditions at hand. That isn't to say that it isn't cold, though—you just might be better suited with something like Specialized Element Windstopper Toe Covers, instead. These toe covers feature a Gore Windstopper Soft Shell construction that ensures superior levels of breathable insulation, plus reliable resistance to both wind and water. The result? Warmth and protection right where you need it, without running the risk of overheating. - Gore Windstopper Soft Shell provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Small/Medium: sizes 38 – 43 - Large/X-Large: sizes 44 – 48
- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low profile - Replaces without tools
Replacement tread for S-Works 7 Road shoes. - Heel Lugs only. - Sold in pairs with screws.
Your S-Works MTB shoes thanklessly accompany you through nature's muddiest, toughest conditions, so thank them and keep them ticking with Specialized's Replacement S-Works Mountain Shoe Lug Kit. These lugs replace the worn-out tread on your S-Works Mountain shoes. - Includes heel, ball, and toe pieces - Includes toe spikes - Sold in pairs; includes screws
Your S-Works Road shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works Road shoes. - Fits 2013 and 2014 S-Works Road shoes - Heel lug only - Sold in pairs; includes screws
Replacement ratchet strap for all shoes with SL buckle closure. - Sold in pairs - 2011 D-Link replacement straps: Used on 2011-12 Pro Road and 2011-12 Pro MTB shoes with no screw attachment. - 2011 D-Link replacement straps. Used on Pro road and MTB shoes for 2011 - 2009 X-Link replacement straps: Used on 2009-10 Pro Road and 2009-10 Pro MTB shoes with Phillips head screw attachment. - 2009 X-Link replacement straps. Used on Pro road and MTB shoes from 2009 and 2010
Stripped, worn-out—whatever happened to your three-hole cleat attachment is between you and your shoes…or maybe between your shoes and your cleats. Either way, Specialized has a T-Nut replacement kit that's easy to install and even easier than buying a new pair of shoes.
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
The FS260-Pro Nemo Overshoes help keep your feet warm on even some of the coolest, dampest days. Superstretch neoprene is used to ensure a snug fit over your shoes. A stretchy, abrasion-resistant sole and hard-wearing aramid stitching make this an overshoe that can be used time and time again. - High-stretch fabrics provide zipperless access - Superstretch waterproof thermal neoprene upper - MTB and road cleat compatible sole - Stretch abrasion-resistant sole/heel - Hard-wearing stitching using aramid thread - Reflective trim
Endura's FS260-Pro Slick Overshoes are just the thing to bring on rides when it may get cold and wet. Their stretch waterproof construction keeps the rain and wind at bay, while the rear Lycra panels and zip closures provide a perfect fit. And, there are reflective accents for enhanced visibility.
Offering multi-season protection from the elements, the FS260-Pro Slick Overshoe II comes in a compact and lightweight construction. - High stretch waterproof PU upper - Open sole design with durable toe panel and instep crank rub protection - Deep elastic cuff with silicone gripper - Offset rear zipper access with snap-down puller - Reflective print twin stripes on the rear
Add that bit of extra warmth to prevent chilly toes with Endura's FS260-Pro Slick Toe Covers. Your toes will thank you because these sleek, waterproof covers slip right on your shoes to block the wind, rain, chilly breezes and cool temperatures.
Crafted from tough, waterproof neoprene, Endura's MT500 II Overshoes will keep your feet dry and warm. These booties feature waterproof rear zips and a welded center seam for a snug, smooth fit over your mountain bike shoes. The grooved rubber toe caps help on muddy slopes and steep climbs while the Kevlar soles withstand tough terrain. There are also reflective details for enhanced visibility. Say goodbye to muddy shoes! - Suitable for MTB cleats only
Flat Pedal Friendly Mud Protection - Super tough, nylon faced neoprene upper with highly durable overlays - Novel, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section tread for added grip - Rear Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Reflective trim - Clean shoes, clean lines, muddy trails - Tight fit = clean shoes - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying
Designed to be abused and then re-used, the MT500 Plus Overshoe II uses super tough nylon faced neoprene with durable overlays in high wear areas and a hard-wearing rubber sole that is compatible with wide fit flat pedal and clipless MTB shoes. The front toe section incorporates aggressive, lugged tread to ensure that you don’t lose any of that vital traction needed to push back up the trail. - Super tough, nylon faced neoprene upper with highly durable overlays - Exclusive, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section for added grip - Rear double Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Clean shoes, clean lines, muddy trails - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying
Pro Performance, Waterproof Pull-on - High stretch, waterproof, multi fabric construction - Wipe clean PU front panels with soft superstretch neoprene ankle - Zipless, pull-on design for comfort and shoe hugging fit - Highly durable, indestructible sole fabric overlays - Raw edge cuff with silicone gripper - Reflective trim
- Stretch waterproof PU fabric with taped center front seam - Extensive 360-degree reflective trim on front, side, and rear - Flatlocked seams for additional durability - Opens fully at sole and up back heel with Velcro fastening for an adjustable fit - Stretch aramid abrasion resistant sole and toe - Suitable for all kinds of footwear and cleats
Endura created the WP Gaiter Overshoes so you can train and enjoy the outdoors even in wet weather. These booties are completely waterproof with reflective accents. Their durable 3-layer nylon sole and elasticized stirrups fit a variety of footwear and cleats. With these shoe covers, you'll be ready when the storms roll through, regardless of which shoes you choose to wear.
- Windproof softshell fabric upper with light brushed lining - Deep elastic cuff with silicone gripper - Highly durable sole fabrics - Instep crank rub protection - Offset rear zipper access with snap-down puller - Reflective print twin stripes on the rear
Beautiful biomotion The Halo S1 Softshell Shoe Cover is your answer for day and night detectability at temps at or above 30-degree F/-1-degree C. With both high-viz color and reflective material in a single garment, Halo provides ultimate visibility, day or night. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Provides biomotion visibility to ensure you're seen by motorists day or night - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance bio-motion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures
Extend your cycling season Round out your cycling wardrobe with one of our most popular autumn road products. The S1 Softshell Shoe Cover keeps you warm, dry, and protected in rainy or dry conditions above freezing. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Visibility colorway uses biomotion to help improve daytime detectability - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective elements enhance visibility during nighttime riding
Warm feet are happy feet Extend your riding season with the S2 Softshell Shoe Cover. Designed specifically for insulation and weather protection over your regular footwear, this cover will keep your feet warm and dry in temps below 30°F/-1°C. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Neoprene for insulation and protection in cold and wet conditions - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance biomotion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures Details - Fiber Content: 79% Rubber / 15.5% Nylon / 5.2% Polyester / 0.3 Polyethylene
Page 1 of 2 Next page