When everything but the kitchen sink is all that will suffice, you need the EMT 12 Tool. With 12 different tools, you'll be prepared to fix whatever bad luck mechanical the road or trail decides to throw your way. - Forged aluminum side plates. - Forged steel bits are nickel plated for corrosion resistance. - 2, 2.5, 3, 4, 5, 6, and 8mm hex bits - T25 Torx, Phillips head, and flat blade screwdriver bits. - Chain breaker with spoke wrenches. - Forged aluminum side plates.
A simple, compact system to carry everything you need to fix a flat without weighing you down. - Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber - CO2 valve head and 2-sided tire lever snap into place for compact and secure storage - Holds a single threaded 16g CO2 cartridge - Fits up to 80mm long tube valve stems
$85.99 $112.99 24% Off
Confident braking means you can go faster. Enough said. SRAM's Disc Brake Bleed Kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: • 2 syringes/fittings • bleed blocks • Torx tool • Crow's foot • Bleeding Edge Fitting
The BBT-19 is a heavy-duty, shop-quality tool for installing and removing Shimano, TruVativ, Race Face, SRAM, FSA and Campagnolo 16-notch external-bearing bottom bracket cups. Made from investment-cast steel, the BBT-19 can be used with either a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut
The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings
Park's FR-5G Cassette Lockring Tool fits most cassette lockrings from Shimano, SRAM, SunTour and SunRace. Made from heat-treated tool steel, the FR-5G features an extra-long splined body to prevent slippage and a guide pin to ensure the tool is in straight, preventing stripped lockrings. And, it can also be used to remove and install Shimano disc brake rotors. The FR-5G requires the use a chainwhip tool to prevent the cassette from turning during lockring removal.
A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
Park's FR-8 Freewheel Remover fits flip-flop BMX hubs with 30 x 1mm threads. It can be held with a wrench or vise, and its narrow profile allows use without removal of cones and locknuts.
12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).
$13.99 - $17.99
Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
$13.99 - $14.99
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
Fact—tools make work easier. Free up that extra hand during tire stud installation with the Bontrager Tire Stud Tool, featuring a magnetized tip that securely holds the tire stud in place for a quick and easy installation. So grab a beverage of your choice, add some studs to your studdable tires, and ride through the winter's worst. Key features - Magnetized tip securely holds tire stud for easy installation - Use with Bontrager Tire Studs for installation on stud-ready tires
High-performance bicycles require precision during setup and adjustment. The Preset Torque Wrench provides secure adjustments while preventing damage to lightweight bars and forks from over-tightening. Product details - Tools are pre-set to 5Nm or 6.8Nm - Check component tightening specifications before using - 4mm and T25 keys are non-removable
- Spider removal tool is compatible with all e*thirteen cranks that have a removable spider, and can also be used as an installation/removal tool for e*thirteen bottom brackets
This opener grips the bottle cap like a wolf on prey and pops it right off every time! We even added a slot for truing your brake rotors and a large hole for a keychain or carabiner. This is not just some generic opener we selected from a catalog – this is a precision engineered tool that you will want to have with you all the time. Weight is a mere 32g so you can carry it with you wherever you go (even on the bike). - Precision shaping for the best bottle opening experience - Grips the bottle cap like a wolf on prey and pops it right off every time - Features slot for truing brake rotors and a large hole for a keychain or carabiner - Made in the USA from 7075 T6 aluminum - 32g
This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet. - Fits Park Tool CRS-15.2 crown race setting tube - Design and manufactured in Minneapolis, MN USA - Material - aircraft grade aluminum
EnCase System bit set contains: - Spoke wrench - Valve core wrench - Flat head bit - Phillips bit - Hex key sizes: 2, 2.5, 3, 4, 5, 6, 8 mm - Torx compatible sizes: T10, T25, T30
Fix tubeless tire punctures and broken chains. This multi-tool has a chain tool on one end and a tire plug built into the handle, with inner storage for tubeless tire plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding. - Compatible with all bicycle chains, including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five bacon strip tire plugs included; refills available - Hardened steel chain pin driver for lifetime durability - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) or carry in a jersey pocket - Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end. The 1-inch hex end features magnets that quickly couple with Wolf Tooth's steel hex insert tools. - 1-inch hex drive at one end and 16-notch 44mm bottom bracket tool (or centerlock rotor tool) at the other end - Includes the wrench only. Steel inserts are not included but can be purchased separately - 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts
$34.99 - $49.99
Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools. - All inserts are 1 inch hex drive interface compatible - Design and manufactured in Minneapolis, MN USA - Nickel plated 4140 chromoly steel
White Lightning's Easy Clean Tire Brush is the perfect solution for cleaning dirty tires. It removes tread grit, which improves traction, helps to prevent flats, and minimizes the mess when storing or transporting your bike. The adjustable Easy Clean Tire Brush fits every shape and size of tire. You can also use it wet or dry, whether you just need to knock some dirt off or really get in there and give 'er a good scrubbing.
The ALiEN is back with a new face! This limited edition ALiEN tool equipped with 31 function pro-quality stainless steel tools for bike maintenance / repair and outdoor adventure. Take-apart design allows easy access and full use of all tools. Includes self-tightening tools and a nylon bag. Tool: 31 Functions - 2-L / 2.5 / 3 / 4 / 5 / 6 / 8 / 10 mm Allen wrenches, T25 Torx wrench, 8 / 9 / 10 mm box wrenches, 14G / 15G / Mavic m7 / Shimano spoke wrenches, chain tool*, chain hook, super hard anodized tire lever, #2 Phillips / flat head screw drivers, serrated knife / saw, bottle opener & engineering grade polymer spacer (*The chain tool is compatible with single and multi-speed chains up to 12-speed, NOT including Campagnolo hollow pin chains) - Tool Material: 403 Stainless steel - Body: Pressed stainless steel frame / Engineering grade polymer - Bag: 1800 denier HD Nylon - Secondary chain link fence, chain pin breaker, two chain pins compartment tool lock, two piece design, self-tightening tools - Size: 8 x 4.5 x 4.5cm / 3.1" x 1.8" x 1.8" - Weight: 272g / 9.57oz
Page 1 of 7 Next page